CAD CAM for Gildemeister CTV 315

DMG Mori CTV 315


  •   Reduction of set-up time by up to 50%
  •     Avoiding collisions - checking the NC program in advance in the 3D machine room simulation
  •     Ready-to-use - complete package ready for immediate use
  •     No complex and expensive postprocessors
  •     Connection to other/existing CAM systems possible
  •     Automatic creation of the structure programming
  •     Piece time calculation at head pressure
  •     Programming using DMG MORI technology cycles
  •     CAD data import DXF-STEP-IGES
  •     Import of 3D tool holders / components





   ● You can copy or re-create workpieces.

   ● When creating the operation plan, the work sequences are defined.

   ● Work sequences are created with tools, tool changes and machining levels.

   ● Workpiece contours are to be imported into the 2 / 3D CAD data format DXF-STEP-IGES (option).

   ● You can program workpieces with a 2.5D CAD / CAM system and machining macros.

   ● It is also possible to create / optimize the NC programs manually.

   ● You can transfer NC programs from external CAD / CAM systems via the clipboard.

   ● Program templates (templates) for various processing types (bar-, feed-processing ...) are stored.

   ● The required program structures are generated automatically.

   ● Our Plandesigner shows you clearly the multi-channel processing.

   ● You can extend your 3D tool library with your own tool trims.

   ● Our programmer automatically generates workpiece setup sheets.

   ● You can export the operation plan and the workpiece setup sheet to Excel.


3D machine space simulation V5.1

   ● The NC programs are simulated on the 3D machine model with blank, clamping device and 3D tools.

   ● Machining on the blank is shown in the same way as in the real machine.

   ● Parallel to the simulation, the NC programs are displayed with technology and axis data.

   ● In the event of a collision, our programmer marks the affected components and NC blocks.

   ● Project history and additional windows for further machine conditions can be retrofitted.

   ● Main / subprogram names are displayed in the simulation.

   ● The 3D blank (prismatic, rotationally symmetrical) can be imported into the simulation in the STL format.

   ● For a new project, the simulation generates the current workpiece as a 3D blank in the STL format.

   ● The distances are measured three-dimensionally.

   ● The NC block run times can be output as an EXCEL table.



Do you have more questions?

Free online demonstration

A Programmer V5 demonstration is free of charge.

We will be happy to advise and support you with questions about the entire software scope.

We also recommend

Browse these categories as well: Programmer V5.1 for DMG MORI, Extension - DMG Programmer 3D - V3 / V4